The Epoxy Fish Surfboard 5ft8 FCS2 White is the small-wave shape our school and rental customers reorder most often. At 5ft8 the board is short enough to turn under a rider's feet and still carries enough area to keep planing when a wave loses its push. We build this board in our own shaping and laminating rooms as an epoxy fish surfboard manufacturer, which is why a reorder matches the layup, rocker and finish of the batch before it. A shop can put it on the wall next to the longer boards, a school can use it as the step after a soft-top, and a rental desk can hand it to a customer who has surfed before without writing off the session. Ordered as a wholesale epoxy fish surfboard, it travels as part of a mixed shipment — fins, leashes and tail pads can be specified with the boards, so a set goes out complete rather than in three deliveries from three suppliers. The finish is deliberately plain: a white epoxy fish surfboard with a centre line running along the deck, black fins underneath and no graphic that will date a wall two seasons from now. That plainness is practical — a fleet stays uniform, a shop can add its own mark, and a deck that has to carry a number takes it without fighting a printed pattern. - A school's main beach break — the board that comes out once students have graduated from soft-tops and need something they can turn. - A hire desk in a holiday town — customers who can already surf want something responsive rather than another learner board, and this shape delivers that without a fragile build. - A shop wall in a beach town — a white epoxy fish surfboard that reads cleanly next to brighter boards and still looks current next season. - A distributor filling a gap — the wholesale epoxy fish surfboard that sits between the 5ft6 shortboards and the 6ft6 mid-lengths in a catalogue. - Coaching staff boards — instructors who want a board that responds under their own feet while they demonstrate from the shoulder. - A travel bag — short enough to pack with a leash, a tail pad and a spare fin set for a week away.
Each board is built in the same sequence: the EPS blank is shaped to the fish outline, the fin box areas and leash plug are set in, then the deck and bottom are laminated with fibreglass cloth and epoxy resin. Epoxy cures with less shrinkage than polyester resin, so the laminate stays tight against the core and the board holds its rocker instead of flattening out over a season of use. That build is what separates a wholesale epoxy fish surfboard from a cheaper poly board in fleet service. The laminate resists pressure dents under heel and knee, the fin boxes sit in reinforced areas of the blank so they are less likely to pull out on a grounding, and the centre line visible along the deck is the stringer that stiffens the whole shape. A board that keeps its rocker keeps its ride, which is the part a school notices when the second season arrives. Tell us the conditions you operate in and we will advise on the laminate; confirm the exact glassing and finish against your first batch before the full run.
Schools standardise on the epoxy fish surfboard 5ft8 for the middle of their ladder: after the soft-top and before a hard shortboard. One instructor can set up eight boards with the same fin set in the morning and know they will all behave the same way in the water that afternoon.
Uniformity is the point. As a custom epoxy surfboard supplier, we cut and laminate boards to the same outline and the same glassing schedule, giving a student the same feedback session after session, which is what makes progress visible — and it means an instructor is teaching the wave rather than compensating for a board that feels different from the last one.
The fin boxes also let a school run two setups from one model: a looser set for students working on turns, and a more settled set for the ones still building confidence on a bigger day. When a board does need attention it is usually a fin, a leash or a tail pad rather than the board itself, so the repair cycle stays short. In a rental fleet, the epoxy construction helps keep repair costs down, and the balanced 5ft8 shape suits a wide range of riders. The fin system can be adjusted quickly between rentals to match different surfers, helping keep turnaround times short.
Between sessions, an epoxy surfboard for rental fleets needs only a short care routine. Rinse the board with fresh water, check the fin boxes and leash plug for grit or movement, and stand it on a rack rather than on its tail — a board left leaning on a hot car park surface for a whole afternoon is the one thing that will soften a laminate. Store boards out of direct sun when they are not in use, and keep them in a bag or under a cover where the deck is not being walked on. Wax builds up and dulls the finish, so scrape it back at the end of a season rather than letting it sit for a year. Small dings are worth sealing as soon as they appear, before water reaches the core; that single habit decides how long a fleet lasts.
- A short board that still catches waves — at 5ft8 it packs easily and turns quickly, while the fish area means a rider is not working hard to get into a waist-high wave. - EPS core with an epoxy laminate — lighter than a poly board and far more resistant to the everyday knocks of a lesson or a rental turn. - FCS2 fin boxes — a fish surfboard with FCS2 fins is quick to re-tune: swap the set by hand and one board can be softened for a nervous rider or tightened for a confident one. - Gloss white deck and bottom — plain enough to carry a school number or a shop mark, clean enough to sit on a dealer display wall. - Reinforced tail leash plug — set into the tail so the pull of a leash goes into the board rather than into the deck skin alone. - Light under the arm — one staff member can move a stack of boards at changeover without needing a trolley.
| Model | B70149 |
|---|---|
| Shape | Fish with swallow tail |
| Length | 5ft8 |
| Core | EPS foam |
| Lamination | Fibreglass cloth with epoxy resin |
| Construction family | EPS epoxy surfboard |
| Fin system | FCS2 |
| Deck | Gloss white with a visible centre line |
| Bottom | White, fins fitted to your chosen setup |
| Rocker | Low and continuous |
| Rail | Full and forgiving |
| Leash fitting | Plug set into the tail |
| Recommended wave range | Small to medium |
Ordering starts with a short brief: the board, the quantity and the setup you want — fin set, leash and pad if they are going out as a package. If you need to see the shape in the foam before committing to a run, ask your sales contact about a sample board. As a custom epoxy surfboard supplier we work from your brief on both sides of the product: graphics, deck colour and branding on one, length, glassing weight and fin configuration on the other. Most programmes start from this 5ft8 fish and adjust from there, which keeps the tooling work short. Production lead time generally runs 2 to 4 weeks depending on the complexity of the build and the size of the order, and we send updates through the manufacturing process so you know where the run stands. Payment terms, packing and shipping arrangements are confirmed with your sales contact when the order is placed. If you are planning a wholesale epoxy fish surfboard programme across a season, place the range in one plan rather than board by board — it lets us schedule the runs together and keeps the finish consistent from the first delivery to the last. - Leashes — match cord length to the board: our regular leashes come in 5ft and 6ft lengths with 5 mm and 6 mm cords, in regular, non-slip and Hypalon cuffs, so a school can standardise on one cuff across the whole fleet. - Fins — our honeycomb fins are offered in single-tab and double-tab versions; confirm the base that matches your FCS2 boxes and the feel you want before the fin order goes in. - Tail pads — a traction pad protects the tail from heel wear and gives a rental customer a consistent place to put their back foot, which shortens the briefing at the desk. - Covers — basic bags and stretch covers keep the deck out of the sun in transit and stop a stack of boards rubbing against each other in a van. - Racks — storage racks for a school shed and display racks for a shop floor keep boards off their tails and off the concrete. - One shipment — boards, fins, leashes and pads can be specified together, so a new fleet arrives ready to go out rather than waiting on a second delivery.
CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.