• F25011 SURF FINS DOUBLE TAB PLASTIC
  • F25011 SURF FINS DOUBLE TAB PLASTIC
  • F25011 SURF FINS DOUBLE TAB PLASTIC
  • F25011 SURF FINS DOUBLE TAB PLASTIC

F25011 SURF FINS DOUBLE TAB PLASTIC

No.F25011
  • F25011 SURF FINS DOUBLE TAB PLASTIC
  • F25011 SURF FINS DOUBLE TAB PLASTIC

Description

Product Overview

A practical plastic fin on the double-tab system, built for boards that carry a twin-slot fin box. Two tabs on the base drop into the box slots and the fin is clamped by the plate and screw at the rear — the fixing the board already has — so a lost or broken fin is back on the board in a couple of minutes. It is not pitched as a performance upgrade; it is the dependable replacement that keeps a board usable, and the reason surf board manufacturers and wholesale distributors keep a plastic double-tab fin in the range all year. If you are fitting out a new board or replacing a damaged one, this is the version to reach for when the box is double tab and the budget is set by the fleet rather than the podium.

Material & Moulded Build

The fin is a moulded plastic part: the outline, the two tabs and the base are formed in one closed tool rather than assembled from layers. That matters most at the base, because tab spacing decides whether a fin seats cleanly, and a moulded base holds the same spacing every time instead of depending on a hand-finished edge. The finish is solid white across the whole fin, with the same sheen on the flat of the blade and around the base, so a set reads as a set on the shelf. Plastic is the most straightforward of the types of surfboard fins we make — there is no core to laminate and no layup to vary — and the practical result for a buyer is consistency: a reorder months later matches the batch already in your stock. Where the finish matters for the packaged presentation, ask to see a packed unit as well as a loose fin, because a moulded part reads differently once it is bagged and labelled.

Double-Tab Base & Board Fit

  • What the base is. Two parallel tabs moulded into the fin base, spaced to drop into the twin slots of a double-tab box. The fin seats flat and is held down by a plate and a single screw at the rear of the box.
  • What it fits, and what it does not. Double-tab boxes only. It will not seat in a single-tab plug with two side grub screws, and it will not go into a long US-style box; ordering the wrong base is the most common way a fin order comes back.
  • How to check a board. Turn it over and look at the box: two slots running along its length with one screw hole at the back means double tab. A single rectangular plug with screws at the sides is a different system.
  • Measure the fin you are replacing. Depth from base to tip, base length along the box, and the distance between the two tabs. Those three numbers let us match a size first time, whether you are buying surf fins for surfboard repair benches or refreshing a whole fleet.
  • Tell us the position. Twin, thruster, quad or a single centre replacement — side and centre positions are set up differently on the board, and the size should suit the place the fin is going.
  • Ask for the size ladder. Sizes are set against rider weight and board, so ask our team for the ladder for this fin before you commit a fleet or a season's stock to one size.
  • Keep the base type consistent. A shop that standardises on double tab across its board wall carries one spare-parts family; mixing systems doubles what has to sit on the shelf.

Fitting & Seating

  1. Rinse the box with fresh water and clear any sand or grit out of the slots before the fin goes anywhere near the board.
  2. Check the two tabs and the slot edges for moulding flash; a light rub with fine abrasive is enough if one edge sits proud, but do not take material off the tab faces.
  3. Slide the fin into the box until the base sits flush at both ends, with no step where the fin meets the board.
  4. Fit the plate and screw through the rear of the box and tighten by hand until the fin stops moving — enough to hold it, not enough to pull the base down into the box.
  5. Sight along the board: the fin should stand square with no lean, and a centre fin should line up with the board's centre line.
  6. Take the board in the water with its surf leash fitted, then check the fin again afterwards; a screw that settles after the first session is normal, so snug it up once more.
  7. If a fin will not seat without force, stop. Either the base type is wrong or there is grit in the box, and forcing it damages the tab.

Care & Storage

Salt water does very little to a moulded plastic fin, but the box and the tabs are where trouble starts, so give your surf fins a fresh-water rinse after a session and flush the box while you are at it. When you take a fin out, loosen the screw first and lift it by the base rather than pulling the tip. Before a trip, check the screw is snug and the plate is sitting square under the base. Store spare fins flat and out of direct sun rather than loose in a hot car or a closed board bag, and keep each one with its plate and screw in a small bag so the set stays complete — a labelled tub sorted by size is the habit most shops settle into. Boards themselves are better kept on a surfboard rack than leaned against a wall, where fins take the knocks, and that applies double on a shop floor where boards are moved all day. If a fin does take a hit, swap it rather than refitting it; it is the cheapest part on the board to replace.

Specifications

ModelF25011
Product typeSurfboard fin
MaterialPlastic
ConstructionMoulded
BaseDouble tab (two tabs)
FitsDouble-tab fin boxes
TemplateSwept-back
FinishSolid white
Set-upAgreed per order — twin, thruster, quad or single replacement
SizesConfirmed per order against rider weight and board
Typical useReplacement fins for surfboard repair benches, rental fleets and spare stock

Ordering & Confirmation

  1. Send the size, the position on the board and the set-up you are fitting — twin, thruster, quad or a single replacement — and quote the model number with the enquiry.
  2. Confirm the finish.
  3. Say whether plates and screws need to come with the fins. Some buyers want them bagged with the fin for the shelf, others buy the fin on its own.
  4. Tell us how the order should arrive: loose bulk, individually bagged, size-labelled cartons or shelf-ready packs, and whether your own labels go on.
  5. If the order is wider than fins, add the surf leash, pad, cover or rack lines to the same enquiry so the range is produced and packed on one schedule.
  6. Confirm quantities, lead time, payment terms and delivery with your sales contact before the season cut-off.
  7. Ask for a sample of the exact size you intend to stock and seat it in one of your own boards before the bulk order; it is the quickest way to catch a sizing or base mismatch. - The fin range. Beyond this plastic fin, the range covers the types of surfboard fins a board wall needs — honeycomb, honeycomb carbon, timber-look honeycomb, G10 glass and nylon — in the base systems used on current boards. - Leashes. Regular and Hypalon surf leash models run from 6 ft to 9 ft, covering shortboards through to longboards and SUPs. - Deck grip. Tail pads, centre pads, skimboard pads and waxless pads; a surf traction pad is the usual addition when a board is set up or refreshed for a season. - Covers. Basic bags, regular bags and stretch covers for storage, travel and shop display. - Racks. Travel tie-downs, storage racks, display racks and bike racks. A surfboard rack keeps boards upright and off the floor, which protects the fins as much as the boards. - One source for the set. Fins, leashes, pads, covers and racks come from the same factory, which is what surf board manufacturers buying a full board-wall range usually want.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

What finish do the fins have?

The surf fins are finished in solid white across the blade and the base, which is what you see in the product photos. The moulded surface is even enough that a pair reads as a pair on the shelf. If you need a different colour for your own range, raise it with your sales contact as an OEM brief rather than a standard order.

Are the plate and screw included with the fin?

The fin is the unit we quote, and the fixing hardware depends on the box your boards are built with — plenty of boards arrive with their own plate and screw already fitted. If you want plates and screws supplied alongside the fins, say so on the enquiry and your sales contact will confirm what can be included.

How do these compare with your honeycomb fins?

Honeycomb fins are built around a honeycomb core with glass fibre and epoxy, produced by resin transfer moulding; this one is a moulded plastic part. Both are available in the double-tab base, so the choice usually comes down to the board and the price band you are buying for, with plastic the straightforward option for rental boards and entry packages. Plastic is only one of the types of surfboard fins we make — carbon, timber-look honeycomb and glass sit above it in the range.

Will they fit a board that takes single-tab or long-box fins?

No — the double-tab base needs a double-tab box. Boards built around single-tab plugs or a long US-style box take different surfboard fins, so tell us which box the board carries and we will quote the matching base rather than send a fin that cannot seat.

Can I match these fins with the rest of the board's hardware?

Yes. The fin sits inside a range that covers the rest of the board: a surf leash in a length that suits it, a surf traction pad for the deck, bags and covers for storage, and a surfboard rack for the shop floor or store room. Ordering them together keeps one production and packing schedule instead of several.

Do these work for rental and school fleets?

That is where a plastic double-tab fin earns its place. Fleets lose and break fins constantly, and this one is bought by the set, fitted at the counter and swapped with nothing more than the screw. Shops tend to keep a spares box sorted by size and freshen a board's deck with a surf traction pad while it is in the workshop. Order fins for surfboard fleets by size rather than by board, so a swap never needs a fresh measurement.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description