• F25316 SURF FIN HONEYCOMB CARBON
  • F25316 SURF FIN HONEYCOMB CARBON

F25316 SURF FIN HONEYCOMB CARBON

No.F25316
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions.
  • F25316 SURF FIN HONEYCOMB CARBON

Description

Product Overview

F25316 is a double-tab fin built around a honeycomb core with a carbon frame moulded inside it. Core, glass, carbon and epoxy go into the tool together and cure as one solid piece, so there is no glued joint between skin and core to work loose over a season of use.

In the hand it looks like a working fin rather than a display piece: a glossy black carbon-look face, the honeycomb pattern sitting under the surface, and a patterned inset that breaks up the black and makes the template easy to pick out on a crowded shop wall. The tabbed base is the part that matters most, because that is what keeps the fins on a surfboard.

Shops stock it as a straight replacement for a lost or broken fin, and board builders fit it when a model needs to stay light without going soft underfoot. It is the carbon branch of our honeycomb range and sits alongside the other types of surfboard fins we mould, so a season's range can be built without splitting the buy across suppliers.

Material & Construction

  • The honeycomb core does the volume. It makes up half the laminate, so the fin gets its depth without the weight of a solid layup sitting behind the foil.
  • Glass and epoxy form the skin. The glass carries the load and the epoxy wets it out; epoxy is also what lets the carbon twill bond cleanly and gives these surf fins their smoother return under load.
  • Carbon adds stiffness where it counts. A measured share of carbon fiber goes into the laminate to hold shape without turning the fin into a plank.
  • The internal frame follows the template. It is drawn for each outline rather than scaled from one master, so the spine of a small fin is not a shrunken copy of a large one.
  • The base gets its own reinforcement. Carbon twill sits at the tab base, the point where load concentrates when a board is pushed hard through a turn.
  • Each run matches the last. Same material stack on every batch, so a reorder of fins for surfboard stock arrives looking and behaving like the sample your buyers signed off.
  • The face is cosmetic, the build is not. The gloss carbon look and the patterned inset are finish details that help the fin read clearly on a shelf next to other types of surfboard fins; they do not change how it performs.

Fin System Fit

  1. Start with the board, not the fin. Most types of surfboard fins mount one of three ways — double tab, single tab or a long box — and the fin already in the board tells you which one you are dealing with.
  2. Match the system first, then the template. A double-tab box takes a double-tab fin whatever brand the board carries; it is the tab layout that has to line up, not the logo.
  3. Dry-fit before you touch a screw. Slide the fin in by hand. If it binds, stop — forcing it distorts the base and the fin will sit proud of the box.
  4. Fit the screw snug, not crushed. Enough pressure to hold the fin, no more; over-tightening is the most common way a good tab base gets damaged on the bench.
  5. Fit the count the set-up needs. A thruster takes three fins, a twin fin surfboard two, a 2+1 a longboard centre plus two sides.
  6. Check the load path after a hard session. The tab base is where the board pushes back on the fins on a surfboard, so that is the area to look at first if a customer reports a wobble.
  7. Ask when the box is unfamiliar. If you are fitting an older board or a box you do not recognise — the case no surfboard fins guide covers — send us a photo of the box and we will tell you which version to ship.

Size & Rider Weight

  • XS — under 55 kg (120 lb). Junior riders and the smallest adults. Carry it shallow unless your shop sits near a grom-heavy beach. - S — 55–70 kg (120–155 lb). Lighter adults and older juniors; a steady seller in most ranges. - M — 65–80 kg (145–175 lb). The middle of the market and usually the deepest line you will hold. - L — 75–90 kg (165–200 lb). Stronger adults and heavier surfers; pair it with M as your core stock. - XL — over 85 kg (190 lb). The top of the chart for the heaviest riders; keep a small quantity rather than a full case. - The bands overlap on purpose. When a rider falls between two sizes, go up for a stronger or more aggressive surfer and down for a lighter one — the overlap exists so nobody sits exactly on a line, whether they ride a thruster or a twin fin surfboard. - Building a stock split. Weight is the fastest way to sort fins for surfboard stock: three bands cover most walk-in trade, with the two extremes held shallow. - At the counter. Use the bands as a short surfboard fins guide when a customer describes their weight and board instead of naming a fin size.

Use & Care

  • Rinse after every session. Fresh water, then let the fin dry before it goes back in a bag — salt left around the tab area is what starts corrosion at the screw.
  • Look at the base, not the tip. Cracks, whitening or a loose tab are early warnings; a chipped tip is usually cosmetic.
  • Keep a spare set. A pair held as repair stock saves a board from sitting out while a replacement is ordered — the simplest insurance a rental fleet can carry, and the reason spare fins for surfboard repair are worth keeping on hand.
  • Store them flat and separated. A cover or a wall rack keeps the fins on a surfboard from being crushed together in a bucket of rental gear.
  • Do not overtighten on a refit. The screw only needs to hold; crushing the tab deforms the base and the fin will sit wrong in the box.
  • Retire a damaged fin. A fin with a cracked base can fail completely and take the box with it, which costs far more than the fin itself.
  • None of this is complicated. Rinsing, a quick look at the base and sensible storage is the care half of any surfboard fins guide, and it is what keeps a set of surf fins working season after season.

Specifications

Product TypeDouble tab surfboard fin
ModelF25316
Moulding ProcessResin transfer moulded
CoreHoneycomb, 50%
Glass Fiber20%
Carbon Fiber10%
Epoxy Resin20%
Internal FrameCarbon, drawn for each template
Base ReinforcementCarbon twill at the tab base
Flex CharacterMore user-friendly flex pattern
Fin SystemsDouble tab; single tab and box fin also available
SizesXS, S, M, L, XL
FinishGloss carbon-look face with honeycomb texture

Accessory Range

CategoryWhat the range covers
LeashesRegular, non-slip, Hypalon, bodyboard and stand-up paddle leashes
Surfboard finsHoneycomb, carbon honeycomb, timber-named, plastic and inkjet
Fin systemsSingle tab, double tab and box fin across the templates
TractionTail pads, centre pads, skimboard pads and waxless pads
CoversBasic bags, regular bags, stretch covers and bodyboard bags
RacksTravel, storage, display and bike racks
PaddlesStand-up paddles for the board range
Board familiesShortboard, bodyboard, skimboard and stand-up paddle

Ordering & Confirmation

  1. Send the boards you are fitting. System, length and the rider weights you see most — that lets us sanity-check the mix before you commit to a split. 2. 3. 4. Confirm finishing and marking. Standard is the gloss carbon-look face with the patterned inset; if your range needs its own mark on the fin, ask and we will tell you what is possible. 5. Confirm packing and labelling. Say whether each surf fins order should be bagged as pairs, boxed as sets or left loose for a repair bench, and how it should be labelled for the shelf. 6. Confirm volumes and dates. Give us quantities and the week you need them in store, and we will confirm what we can produce and when. 7. Keep the code for reorders. Ordering by the model number is what keeps a repeat identical to the first run. 8. Plan the whole accessory buy with us. Chain store groups, supermarkets and surf board manufacturers take this fin alongside leashes, traction pads and covers, so one schedule covers the range and its reorders.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

How is this fin different from the glass honeycomb version?

The outline work is the same, but the laminate is not. This one adds a carbon frame inside the core and a carbon twill at the base, and the material mix shifts to make room for both. What the rider gets is a fin that returns more smoothly than the plain glass honeycomb surfboard fins, a difference that shows up when the fin has to come back to shape under load rather than holding a hard line. Both sit in the same honeycomb family, so a shop can carry one of each and let the customer choose.

What does the fin look like out of the box?

A glossy black carbon-look face, with the honeycomb pattern visible under the surface rather than printed on top, plus a patterned inset that breaks up the black. The tabbed base is finished square so it seats cleanly in the box. The finish is consistent across the size run, so a mixed order still looks like one range on the shelf.

Is the internal carbon frame the same in every size?

No. The frame is drawn for each template rather than scaled up from one master, so the XS and the XL are shaped for their own outline. That is deliberate: a frame that suits a small fin does not suit a large one, and scaling tends to leave the bigger sizes feeling either too stiff or too vague. If you carry several sizes, treat each as its own fin rather than a larger or smaller copy.

Can I use this fin on a twin fin surfboard?

Yes, as long as the box matches. A twin fin surfboard needs two fins where a thruster needs three, so order the count you need and match the pair by template and size. Tell us the set-ups your customers ride and we will confirm the count and the pairing before the order goes into production.

What should I check when the fins arrive?

Open a sample and look at the tab base first, since that is where transit damage shows. Check that the tabs are clean and square, dry-fit one surfboard fin in a spare box before the stock goes out, and compare the finish against the sample you approved. If something is wrong, raise it before the stock reaches the shelf.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description