The Counter Fin For Single Tab Boards
This honeycomb single tab surf fin is the one we suggest a shop keeps within reach when a rider walks in with a board that needs a fin and no long conversation. The F25135 uses the plain honeycomb build in an all-round outline, so it covers the everyday conditions most customers actually surf rather than one specialised corner of the market. The base is a single slotted tab: it drops into the box most shortboards, funboards and hybrid boards already carry, and one screw locks it. It is not the stiffest fin in the range; it is the straightforward one a shop keeps in reach.
Five Sizes, Quoted By Rider Weight
| Size or selection point | Detail |
| XS | Under 55 kg / 120 lbs — groms, light teens and smaller adults |
| S | 55-70 kg / 120-155 lbs — lighter adults and older groms |
| M | 65-80 kg / 145-175 lbs — the middle of the adult range |
| L | 75-90 kg / 165-200 lbs — heavier adults and stronger surfers |
| XL | Over 85 kg / 190 lbs — large adults and riders carrying extra weight |
| Sizing basis | Rider weight, quoted in kilograms and pounds |
| Overlap | Adjacent sizes share a band, so a rider on the edge has a choice |
| Between sizes | Go up for more drive and hold; go down for a looser, quicker turn |
| Not sized by | Board length or wave type |
| Counter check | Ability, usual conditions and board volume |
What The Honeycomb Layup Does
- We mould this fin in our own tooling as a surf fin manufacturer, so the layup stays the same from one production run to the next. - A forgiving feel in the water. These lightweight surfboard fins keep mass low toward the tip, so the fin feels lively rather than locked up under a rider who is still building their turns and in smaller, softer surf. - A core that must stay sealed. The honeycomb is fully encapsulated. If a hit opens the skin, retire the fin: a wet core does not dry out and the fin will go heavy and soft.
Seating The Tab And Reading The Board
- One slot, one screw. Boards with one slot running fore and aft take single tab surf fins; the tab slides in from the front and a plate and screw lock it inside the box. This is the fitment most shortboards and hybrid boards arrive with. - Set it fore and aft before tightening. Slide the fin forward for a tighter turn under the back foot, or back toward the tail for more drive and hold. Small moves are enough to feel; change one thing at a time. - Check the box, not the old fin. A single slot means single tab; two separate slots mean double tab; a long open channel through the board means box fin. Old fins get trimmed and forced, so the board is the reliable guide. These lightweight surfboard fins are not built for big-wave hold or a heavily raked drive line; those are different outlines in the range.
Checks Before And After A Session
- Clear the box of old wax, sand and salt, and turn the screw in and out once before fitting the fin.
- Slide the tab in from the front of the box. A single tab should travel without force; if it has to be pushed, clean the box rather than filing the base.
- Set the fin where you want it, then start the screw by hand so the thread does not cross.
- Tighten until the base sits firm and the fin cannot be rocked by hand. Too tight compresses the tab; too loose lets the fin work and wears the box.
- Rinse with fresh water after salt water and let the fin dry before it goes back into a cover or bag.
- Store spare fins flat, out of direct sun and away from a hot car boot. Heat, not water, is what distorts a base.
- Inspect the tab and base after any session where you touched bottom. A cracked tab or a base that has started to delaminate is a replacement, not a repair.
Model & Build Details
| Item | Detail |
|---|
| Model | F25135 |
| Fin system | Single tab |
| Construction | Honeycomb core, glass fiber, epoxy resin |
| Material split | 50% honeycomb core / 30% glass fiber / 20% epoxy resin |
| Moulding | Resin transfer moulding |
| Size range | XS to XL, mapped to rider weight |
| Also made in | Double tab and box fin systems |
| Typical use | All-round single tab replacement |
What Travels With The Fin Wall
- Leashes. Hypalon leashes in 6 ft, 7 ft, 8 ft and 9 ft, so a replacement fin and the leash a customer always needs can travel on the same wholesale surf fins order.
- Traction. Tail pads and centre pads for the same boards these fins go on; a fin sale is often the moment a rider is already thinking about how the board is set up.
- Covers and racks. Basic bags, regular bags, stretch covers, travel racks and display racks. A display rack is what turns a pegboard of fins into something a customer can read without a member of staff standing beside it.
- The rest of the fin wall. The same honeycomb build in double tab surf fins and box fin, the carbon-framework version, G10 glass, plus timber and nylon, so a shop can fill the wall from one supplier instead of several.
Factory Supply And Reorder Notes
A shop building a wholesale surf fins order can add leashes, traction, covers and racks to the same delivery, so the accessory wall arrives together and the reorder list stays simple. We take on OEM and private-label work: custom surf fins can be supplied with your graphics and brand markings, while the shape, layup and finish of the F25135 come from the existing tooling. Send the systems, sizes and quantities you need, and we will confirm what can be built together and when.
Scale & Supply Capability
CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.
FAQ
Where does the F25135 fit in everyday surf?
It is the all-round fin in the plain honeycomb build, and one of the single tab surf fins we make for boards with one slotted box. It is chosen for the conditions most customers actually ride: beach break with some push, a soft reef, or a point with room to draw a line. It is not a big-wave fin and not a heavily raked drive fin. A shop can keep it as the first fin it shows a rider who wants a straightforward replacement, then move to a more specialised outline if the board or the surf asks for one.
Do I size this fin by board length or rider weight?
By rider weight. XS is under 55 kg / 120 lbs, S is 55–70 kg / 120–155 lbs, M is 65–80 kg / 145–175 lbs, L is 75–90 kg / 165–200 lbs, and XL is over 85 kg / 190 lbs. A rider near a boundary can ride either size; the chart is a starting point, not a rule that changes with board length.
What does resin transfer moulding change about the finished fin?
We mould in a closed tool as a surf fin manufacturer, so resin is drawn through dry glass and core under pressure and the resin-to-glass ratio is set by the tool rather than by hand. The result is a fin with a consistent layup from one production run to the next. That consistency is what makes a reorder match the fin already on the wall.
How do I know if the honeycomb core has taken on water?
The core is fully encapsulated, so water should not reach it unless the skin is cracked or opened. If a fin feels heavy or goes soft after a ding, retire it: a wet honeycomb core does not dry out and the fin will lose its feel. A cracked tab or a base that has started to delaminate is also a replacement, not a repair.
Can the F25135 be made with our own branding?
Yes. We take on OEM and private-label work, and custom surf fins can be supplied with your graphics and brand markings. The shape, layup and finish of the F25135 come from the existing tooling, so branding changes are confirmed against that build before the order is scheduled.
What changes if I move up to the carbon version?
The carbon version keeps the 50% honeycomb core but changes the layup to 20% glass fiber, 20% epoxy resin and 10% carbon fiber. The internal carbon frame is matched to each shape and gives a more user-friendly flex pattern, so the fin springs back rather than folding away. It is the step up for a rider who wants more response from a familiar outline without going to solid glass.