• L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM

L22811 SURF LEASH REGULAR 6FT 6MM

No.L22811
Lightweight leash for small to medium-sized waves
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM
  • L22811 SURF LEASH REGULAR 6FT 6MM

Description

Regular Leash Overview

This is a TPU surf leash for small waves through to the moderate days in between: 6 ft of cord, an ankle cuff at one end and a rail saver at the other, in the 6 mm gauge. Six feet keeps the board close without trailing a loop of slack through the water, which is what most shortboard and funboard riders want from a regular leash.

Cord gauge is what changes how a leash behaves. As a surf leash 6 mm in diameter, this one carries more material than the 5 mm leashes in the same length, so it holds up better when a wave loads the cord, and it still sits light enough on the ankle that you stop noticing it after the first paddle out.

As a surf leash manufacturer we specify the cord, cuff and hardware together rather than assembling from whatever is in stock, so the leash behaves as one piece from the plug to the ankle and the finish stays consistent from one production run to the next.

Cord Gauge & Wave Range

  • The 6 mm cord is the point of this model. More material in the cord means more margin when it comes tight under a falling board, which is what separates it from the 5 mm leashes cut to the same length.
  • Made for small to medium surf. This surf leash for small waves and the moderate days in between does not need a 7 mm cord behind it, and the lighter gauge stays out of the way while you paddle.
  • Light enough to forget. The cord trails cleanly off the tail instead of dragging through the paddle stroke, so a shortboard rider notices it only when it is doing its job.
  • Coil memory that helps. Top-grade TPU returns to its coil after a pull, so the leash hangs clear of the deck rather than tangling around your feet on the next paddle out.
  • Where the 5 mm still wins. On the smallest shortboards in waist-high surf, the thinner cord is lighter and cheaper to stock; keep this one for the days with some push in them.
  • When to step up. Above head-high, or on a board of 7 ft and longer, move to the 7 mm cord — same build, more material, more drag.
  • What to stock. For most shops the 6ft surf leash at 6 mm is the volume line, with the 5 ft and 7 ft sizes either side of it on the wall — as a custom surfboard leash supplier, that is the length we build the range around.

Material Composition

ComponentSpecification
TPU60% of the build
Polypropylene15% of the build
Neoprene10% of the build
Nylon10% of the build
Stainless steel5% of the build
CordTop-grade TPU
Swivels316 stainless steel
TPU familyThermoplastic polyurethane, a flexible elastomer rather than a rigid plastic
Neoprene familyFoam padding material, compressible rather than woven
Nylon familyWoven synthetic used where the build calls for tensile strength
Polypropylene familyLightweight moulded plastic used for rigid components
Stainless family316 marine-grade alloy used for the metal hardware

Ankle Cuff, Swivels & Rail Saver

  • Double-padded neoprene cuff. Two layers of padding spread the pull across the ankle instead of letting a single strap press on the bone, which is what you feel after an hour of paddling or a long hold-down. - A cuff that stays where you put it. The strap closes snugly and sits above the ankle bone, so the cuff does not rotate around the leg while you are paddling for a wave. - Why the cuff matters in a rental pool. Where the same boards go out to customers of different sizes all day, as they do on a wholesale surf leash order for a rental fleet, a padded surfboard ankle leash cuff is the difference between a leash that gets worn and one that gets left on the beach. - 316 stainless swivels. The swivels turn under load so the cord cannot wind itself into a spring, and 316 is the marine-grade stainless that keeps turning after repeated salt-water exposure. - Streamlined rail saver. The rail saver is the webbing where the leash meets the board. Its streamlined shape sits flat on the tail so the pull goes through the webbing instead of the cord edge rubbing against the rail. - Moulded cord ends. The junctions where the cord meets the cuff and the rail saver carry the highest load on any leash, and the moulded finish keeps them from fraying at the edges.

Fitting, Use & Care

  1. Check the rail saver, the cord ends and the swivels before you paddle out — those three points take the load, and they are where a leash starts to fail.
  2. Fit the rail saver flat over the tail rail with the webbing side out, so the cord never touches the board itself.
  3. Strap the cuff above the ankle bone, snug enough that it cannot rotate but loose enough to slide a finger underneath.
  4. Rinse the TPU surf leash in fresh water after every session — salt dries into the cord and stiffens the swivels.
  5. Dry it in the shade rather than in direct sun, and keep it out of a hot car; UV and heat age TPU and neoprene faster than salt water does.
  6. Retire it when the cord shows nicks, when it stays kinked after a pull, or when a swivel stops turning freely — a leash that has lost its spring is the one that snaps.

Pairing With Fins, Traction, Covers & Racks

A leash rarely ships on its own. A shop building a set puts the board, the surfboard ankle leash, the fins, a traction tail pad, a cover and a rack into one order, so the customer walks out with a complete setup and the buyer deals with a single shipment instead of four. The range around this model comes from the same surf leash manufacturer and is built to fit that order: honeycomb, timber and G10 glass fins, traction tail pads, board covers in basic and stretch versions, and storage, display and travel racks. Buyers restocking accessories usually build the order around the 6ft surf leash and add the neighbouring lengths either side of it.

Dimensions & Specifications

- As a surf leash for small waves, six feet of cord suits the boards a shop sells in the greatest numbers: shortboards and smaller funboards from about 5 ft 8 up to 6 ft 6. At that pairing the cord hangs with a little slack off the tail instead of stretching straight, so the board travels on a wipeout without the leash taking the full load. - Once a board goes past roughly 6 ft 6, step up to the 7 ft model on the same 6 mm cord. A mid-length or a 7 ft 6 board on a 6 ft leash pulls the cord tight the moment it tumbles, and a cord held at full stretch is the one that parts. - Longboards follow the same logic at the other end of the range: the 8 ft 2 and 9 ft 1 boards belong with the 8 ft leash, so the rail saver is not carrying a board that has already run out of cord. - Too long is as awkward as too short. An 8 ft leash on a 6 ft shortboard leaves a loop of slack trailing through the water on every paddle stroke, tangling around your feet and dragging the rail in the shorebreak. - For a wall, the range runs 5 ft, 6 ft, 7 ft and 8 ft in the cord gauge that suits each length, and the 6 ft is the fastest mover — it covers the shortboard and funboard stock that fills most of the rack. - The 6 ft surf leash also comes in non-slip and Hypalon cuff versions at the same length and gauge, so a fleet can hold one length while matching the cuff to how the boards are used. - Rental desks and schools get the most from standardising: stock the length that matches the bulk of the fleet, keep fewer of the next size up for the longboards, and place both on the same order so the ratio stays right through the season.

PropertyValue
ModelL22811
Length6 ft (1.8 m)
Cord diameter1/4 in (6 mm)
TypeSurf leash 6 mm, regular ankle cuff
Wave rangeSmall to medium
CuffDouble-padded neoprene
Rail saverStreamlined design
Leash classRegular
Custom coloursAvailable on request
Custom brandingAvailable on request

Ordering & Delivery

  1. Send your buy list — lengths, cord gauges, cuff styles and quantities — whether it is a single-size wholesale surf leash order or a mixed range, and we will confirm what we can produce against it.
  2. Confirm the cuff mix. This regular cuff, the non-slip version and the Hypalon version all run in the same length, so a mixed line for different customers comes from one order.
  3. For private-label work, send the branding and packing you need — printed strap, header card or printed sleeve. As a custom surfboard leash supplier we confirm artwork and packing details before production starts.
  4. Ask your sales contact about sample availability and the current lead time; both depend on the run and the season.
  5. Confirm the payment terms, shipping terms and the destination port or address that apply to your order.
  6. Book the reorder at the same time. As a surf leash manufacturer we hold the cord, cuff and hardware specification between runs so your second order matches the first.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

Which boards does a 6 ft leash suit?

Length matching is simple: the leash should roughly match the board, so a 6 ft leash belongs with shortboards and smaller funboards of about the same length. On a mid-length or a longboard, move up to the 7 ft or 8 ft model so there is enough cord for the board to travel without loading the leash. If you are stocking a wall, the 6ft surf leash is the size that turns over fastest, because it covers the most common board in most shops.

What is the difference between the regular, non-slip and Hypalon versions?

Only the cuff changes. All three use the same TPU cord, the same rail saver and the same 316 stainless swivels at this length and gauge. This regular version has the double-padded neoprene cuff that most riders find comfortable; the non-slip version holds the strap more firmly for shared or rental use; the Hypalon version uses a lighter cuff for riders who notice weight on the ankle. When you are putting a tpu surf leash line together, the cuff is the choice your customer makes — the cord underneath is identical.

Can the cuff be worn over a wetsuit?

Yes. The strap closes over a bare ankle or a wetsuit, and the padding on this surfboard ankle leash keeps the strap off the ankle bone either way. Set it above the bone and snug enough that it cannot rotate; if it slides up and down as you paddle, tighten it one notch. Over a thick winter boot the cuff sits slightly higher on the lower leg, which is normal and does not affect how the leash performs.

How should the leash be stored so it does not kink?

Coil it loosely — roughly the size of a dinner plate — and hold the coil with the cuff strap rather than a rubber band pulled tight. A TPU cord stored stretched, or flattened under a stack of boards, takes a set and hangs awkwardly on the next session. Rinse and dry it first, then coil: a dry cord keeps its memory better than one packed away wet.

Can the leash be supplied under our own brand?

Yes. We work as a custom surfboard leash supplier for shops and brands that want their own cuff colour, printed strap or branded packaging, while the cord and hardware stay the same as the standard model. Tell us the cuff style, colourway and branding you have in mind, and we will confirm what can be produced for your order.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description