L22812 SURF LEASH REGULAR 7FT 6MM

Product Overview

The Regular series is the everyday line on CIMI's leash wall, and this 7ft surf leash sits in the middle of it: a 7 ft (2.1 m) cord at a 6 mm gauge, model L22812. It is sized for the mid-length boards that now fill most shop ranges and school quivers — long enough to give a 7 ft 0 to 7 ft 6 board room when it goes over, light enough that it does not drag or swing on the way out. Round the ankle it runs a double-padded neoprene cuff with a hook-and-loop closure. The cuff is the part a rider notices first, because it decides whether a session still feels comfortable at hour two, and the strap adjusts to sit over a wetsuit ankle or a bare one. Length is the first decision on any leash. Below about 6 ft 6 a shorter cord keeps the board close; from 7 ft upward the cord has to be long enough for the board without becoming something to trip over. This model covers mid-lengths and the shorter end of the longboard range, while a longboard surf leash in 8 ft or 9 ft takes over for the bigger boards above it. This is a lightweight leash built for small to medium-sized waves.

Materials & Composition

• TPU cord, 60% of the build — the cord is a surf leash TPU extrusion rather than rubber or a generic plastic: it stretches and recovers, holds its memory after a hard pull, and does not go chalky after a season in salt water.
• Polypropylene, 15% — the moulded plastic parts of the assembly. It does not take on water, so the fittings keep the same weight and the same fit session after session.
• Neoprene, 10% — the padding in the cuff. It is what makes the cuff soft against the ankle while still holding its shape around the strap.
• Nylon, 10% — the webbing and stitching that carry the load from the cuff through to the rail saver, and the part that decides how the leash wears at the joins.
• 316 stainless steel, 5% — the metal in the build, all of it in the swivel joints. Marine-grade stainless is specified here precisely because a leash spends its life in salt water.
• The 6 mm gauge — a 6 mm surfboard leash is the middle thickness in the Regular series: enough body to hold a mid-length in small-to-medium surf, without the extra drag of a 7 mm cord.

Ankle Cuff & Hardware

The cuff is where a leash is judged. CIMI double-pads the neoprene so the strap spreads pressure across a band of the ankle rather than digging in at one edge, and the hook-and-loop closure lets a rider set it as firm or as loose as they want over a wetsuit or bare skin. The lining is soft and the edging is bound, so a surfboard ankle leash stays flat and comfortable once it is wet instead of bunching up under the strap.

Both ends turn on 316 stainless swivels, two of them, so the cord can rotate without winding itself up. That is what takes the twist out of the surf leash TPU cord before it reaches the ankle, and it is why the cuff keeps sitting the right way round after a wipeout instead of rotating on the leg.

At the board end, a streamlined rail saver wraps the rail instead of pulling straight on the plug. The triple wrap spreads the load over a wider patch of foam and glass, and the low profile keeps it from catching on the deck, in a bag or under a foot. The leash string ties through the board's plug; check it at the same time as the cord.

Cord Length & Board Pairing

Use, Care & Replacement

1. Rinse after every saltwater session — fresh water over the cuff, the cord and the swivels takes the salt off before it settles into the joints.
2. Dry it out of direct sun — hang the leash up rather than leaving it coiled on a hot deck, because UV is what ages both the cord and the neoprene.
3. Check the 6 mm surfboard leash cord before you paddle out — run it through your fingers and look for nicks, fuzzing or a flat spot where it has been stretched hard.
4. Work the swivels by hand — they should turn freely; a stiff swivel is the first sign that salt or sand has got in and the cord is starting to twist.
5. Look at the joins — the string at the plug end and the stitching at the rail saver are the two places a leash gives way first, and both are easy to see.
6. Replace rather than repair — once the 7ft surf leash cord shows deep nicks or has lost its snap, or the cuff strap has stretched, a new surfboard ankle leash costs far less than a board on the rocks.
7. Store it loosely — coiled wide, never knotted, and away from heat.

Specifications

Matched Sets & Accessories

• Leashes across the wall — the Regular series runs from shortboard to longboard lengths, so one order can fill the leash rail without mixing brands. For boards of 8 ft and up, a longboard surf leash in the longer sizes carries the extra cord; this 7 ft model serves the mid-lengths in between. - Fins — honeycomb fins in single tab and double tab, plus timber and G10 glass options. Ordering them with the leashes keeps fin boxes and spares aligned with the boards you stock. - Traction — tail pads, centre pads and waxless pads. A pad and a leash are usually bought together for a new board, so the board can leave the shop as one complete set. - Covers — basic bags, regular bags, stretch covers and bodyboard bags. A cover keeps the board protected in transit and saves the rail saver's stitching from being dragged over edges. - Racks — travel rax and tie-downs, storage racks, display racks and bike racks, for shops fitting out a floor or schools storing a fleet. A school or a rental pool asks something different of a leash than a single surfer does. It is not whether the cuff feels right on one ankle, but whether it still works on the hundredth ankle of the week — and whether the desk has a replacement ready when one finally goes. A cuff that fits the whole class. The double-padded neoprene cuff closes on hook-and-loop, so it takes up the difference between a junior's ankle, an adult over a wetsuit and a bare ankle in summer without staff keeping three sizes on the shelf. The padding spreads the strap pressure, which matters on a beginner who tightens it hard on the beach and then wears it for a full lesson. A cord built for beginner handling. Learners let boards tumble in the shallows and pull hard on the cord when they come up; the TPU extrusion stretches and returns to length instead of staying long and baggy. At 6 mm it carries the mid-lengths most quivers are built around without the weight of a 7 mm cord. A board end that survives the sand. The streamlined rail saver wraps the rail instead of loading the plug on its own, and the 316 stainless swivels keep the cord from winding itself up when a leash is moved from one board to the next. Stocked in the right mix. A fleet order is normally built as one 7ft surf leash per mid-length plus a few extra in the same size as replacements, all of it placed as a wholesale surf leash order alongside the 6 ft and 8 ft lengths the rest of the rack needs. Matching the cuff colour to the cord length is the quickest way to stop the wrong leash going onto the wrong board, and it is arranged as part of a custom order. For a shop, this is the add-on that leaves the till with a 7 ft to 7 ft 6 board. For a distributor, it is the middle line of a leash wall that runs from shortboard to longboard without a gap.

Ordering & Delivery

1. Confirm the mix — which lengths and cord thicknesses your wall or fleet needs. A wholesale surf leash order is built line by line, so the split you agree is the split that ships.
2. Confirm colour and branding — if the cuff should carry your own colour or logo, send the colour reference and artwork before production starts; a custom surf leash supplier order is scheduled once the design is fixed.
3. Ask about samples — if you want to check the cuff padding or the feel of the cord before committing, ask your sales contact about sample availability.
4. Confirm quantities and pricing with your sales contact — both depend on the mix, the destination and the season, so they are quoted per order.
5. Confirm packing — how the leashes should be bagged, labelled or made shelf-ready for your stores.
6. Confirm lead time and shipping terms before you commit to a season date. As a surf leash manufacturer we schedule production around the delivery window you give us.
7. Confirm reorders — keep the model reference on file so the next batch matches the one before it.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. As a custom surf leash supplier, we take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ