• B70112 LONG EVA SOFT TOP SURFBOARD 8FT0
  • B70112 LONG EVA SOFT TOP SURFBOARD 8FT0
  • B70112 LONG EVA SOFT TOP SURFBOARD 8FT0
  • B70112 LONG EVA SOFT TOP SURFBOARD 8FT0

B70112 LONG EVA SOFT TOP SURFBOARD 8FT0

No.B70112
This soft top surfboards build in epoxy surfboard technology.
  • B70112 LONG EVA SOFT TOP SURFBOARD 8FT0
  • B70112 LONG EVA SOFT TOP SURFBOARD 8FT0

Description

Who It's For

Surf schools and camps are the largest group buying this length. What they need is boring and specific: boards that survive a new rider every hour, that behave the same from one season to the next, and that an instructor can pick out of a line-up from the beach. One 8 ft 0 covers the widest spread of students in a session, which is why it is usually the soft top surfboard for beginners that gets ordered first and replaced last.

Rental centres and beach operators judge the same board on different terms — how it looks after a hundred sessions, how quickly it can be checked in and out, and whether the fins, leashes and pads on it can be replaced from stock rather than from a special order.

Chain stores and sporting-goods buyers see it as a shelf board. A longboard outline is instantly readable as a beginner's board, the deck colour photographs well, and it can be sold as a set with a leash and a tail pad, which lifts the value of the sale without adding a second supplier.

Distributors and wholesalers use it as the anchor of a soft-top section: one dependable length a shop can reorder, with the shorter and more progressive shapes built around it.

Resorts, holiday clubs and camp operators with house boards make up the rest. They want a board a first-time guest can paddle, that staff can carry two at a time, and that does not need a repair budget of its own.

Product Overview

The 8 ft 0 is the longest board in our EVA learner range, and the one that lets a single length cover a whole class. It carries a longboard outline — rounded nose, a full middle, rounded tail — with enough foam under the chest to keep a beginner gliding between strokes while the soft deck takes the knocks that come with first sessions. The deck runs a light blue tone with a centre stringer line over a white bottom, so the board is easy to pick out from the beach and reads immediately as a learner board on a shop wall.

As an EVA soft top surfboard supplier we build it from the inside out: an EPS core, a fibreglass and epoxy laminate, then a layer of extruded EVA foam across the deck and rails. That structure is what separates it from a foam-only learner board, which is forgiving on day one and soft through the middle by the end of a season. Where a glassed longboard asks a beginner to commit to the pop-up, this one lets them get it wrong, climb back on and try again.

Length & Paddling Ease

  • Catches the small stuff. An 8ft soft top surfboard picks up the soft, unbroken rollers that a shorter board paddles straight past, so a beginner gets more rides out of a one-hour session.
  • Glides between strokes. Once it is moving, the board carries its momentum, and a rider can get to their feet without the two extra paddle strokes a shorter shape demands.
  • Steady at stand-up. Length and volume slow everything down. The board is already planing when the rider pushes up, so the first wobble happens on a stable platform instead of a twitchy one.
  • Forgiving on the pop-up. A long nose buys time. If the front foot lands late or wide, the board keeps running rather than digging in and stopping dead.
  • Teaches trim before turns. The 8 ft 0 rewards a rider who moves forward and back on the deck, which is the first thing an instructor teaches and the habit that carries over to every board a student rides afterwards.
  • The class default. This is the soft top surfboard for beginners that most of our school customers order first, because one length covers the widest spread of riders in a mixed session.
  • The honest trade-off. A longer outline turns on a wider arc. That is deliberate here: the board is built to catch waves and get people standing, not to snap off the lip.

Material & Build

Every board in this range is built to the same recipe, and the recipe matters more than the shape printed on the deck. The core is EPS foam — light enough to carry under one arm, buoyant enough to sit a beginner high in the water, and firm enough to hold its shape through a season of knees, heels and dropped fin-first landings.

That core is wrapped in fibreglass cloth and epoxy resin, the same laminate we use on our hard boards. The glass carries the load and the resin holds it there, giving the board its structure and a little memory, so it flexes underfoot and springs back instead of creasing. A foam-only learner board has none of that: no laminate, no shell, and a deck that goes soft in the middle long before the outline wears out.

Over the finished laminate sits a layer of extruded EVA foam, carried across the deck and around the rails. It is the part a beginner actually touches — soft under a knee, forgiving against a shin, warm enough to sit on between sets. Because the skin is bonded over a sealed laminate rather than laid straight onto bare foam, water has a much harder time tracking underneath it, which is where lower-grade soft-tops fail first.

An epoxy soft top surfboard also ages differently from a poly board. Knee dents stay shallow, the skin hides the scuffs that would send a glassed board to a repair shop, and the laminate keeps its stiffness, so the board does not go flat and unresponsive after a couple of seasons. It is the same material stack across the learner range, so a school ordering any length from the same EVA soft top surfboard supplier gets a board that behaves like the ones already in the rack.

Fins & Fin Boxes

The tail carries Futures fin boxes, set into the laminate during layup rather than screwed onto a finished skin. That matters on a school board: the load from a fin goes into the structure of the board, and a box that takes a hit can be repaired like any other ding instead of tearing a pocket out of the foam.

Futures is the reason we fit them. It is one of the most widely stocked fin systems in the world, so a shop or a school that already runs Futures fins can move a set between boards, replace a single fin from stock, and keep a fleet on the water without waiting for parts.

Our own honeycomb fins are made by resin transfer moulding, which gives a light fin that holds its shape across a range of conditions rather than being tuned to one. They come in single-tab and double-tab bases; the single-tab version is the one that seats in these boxes, and it is the set we would put on a learner fleet.

Fin choice changes the ride more than most beginners expect. More fin area gives drive and stability in soft, slow waves — exactly the water a lesson happens in; less area loosens the tail for a rider who is ready to turn. Because the boxes are standard, a school can run one fin set across the whole rack and swap only when a rider needs something different.

We mould the fins ourselves, so a fin order can travel with a board order and arrive matched to the boxes. Check the fin screws before each session: a fin that works loose in the water will enlarge its box, and that is a repair nobody wants in the middle of a season.

Leash, Traction, Cover & Rack

  • Leash. An 8 ft board wants an 8 ft leash in a 7 mm cord for everyday surf, or a 9 ft 8 mm when the waves and the board both get bigger. Our Hypalon-cuffed leashes carry a rail saver and 316 stainless swivels, and the longer lengths are the ones that pair with this board.
  • Traction. A tail pad gives the back foot a fixed spot to push against, which is what a learner needs while they are still finding their stance; a centre pad or waxless deck pad suits longboard riders who walk the board. Both are worth fitting before the board goes into a lesson programme.
  • Cover. The EVA soft top surfboard skin is the part that shows wear first, so a stretch cover for the van and a basic or regular bag for storage pay for themselves quickly — they keep sun, sand and other boards off the deck.
  • Rack. Storage racks for a school shed, display racks for a showroom floor, and travel racks with tie-downs for moving a fleet by trailer. A board stored off the ground and out of the sun lasts visibly longer.
  • One order for the whole set. Leashes, fins, pads, covers and racks come from the same soft top surfboard manufacturer as the board, so the lengths and fittings match, colours can be coordinated, and replacement parts arrive with the next batch of boards.

Applications

  • First lessons on a mellow beach break. Instructors stand in the whitewater and push students into small, soft waves; the board planes early, so the ride lasts long enough for a student to think about standing up rather than just falling off.
  • Mixed-ability group sessions. With one length in the water, the instructor spends the hour teaching instead of swapping boards between riders of different sizes.
  • Rental desk rotation. An 8ft soft top surfboard that comes back with a scuffed deck goes out again the same afternoon — the skin hides marks a glassed board would need repaired, and staff can check the fins and leash in under a minute.
  • Progression sessions. Paddle technique, pop-up repetitions and trim drills all work better on a board that gives the rider time; the same 8 ft 0 that carried them through lesson one still teaches them something in lesson ten.
  • Resort and holiday-club programmes. Supervised sessions for guests who have never surfed, boards kept on a rack between slots, and staff who need a board that behaves predictably for whoever picks it up.
  • Showroom floor sets. Shown nose-up beside a leash and a tail pad, the longboard outline explains itself to a customer walking the aisle.
  • Fleet replenishment. Schools and chains rarely replace a whole rack at once; a wholesale soft top surfboard order of a few boards a season keeps the fleet consistent, and the accessories can travel with them.

Use, Care & Storage

A soft-top is low maintenance, not no maintenance. Rinse the board in fresh water after every session — salt left around the fin boxes and along the rails is what starts most of the corrosion and stiffening that fleets complain about. A quick rinse and a dry in the shade is enough.

Heat is the real enemy. Leave the board in direct sun or in the back of a closed car and the EVA skin softens while the laminate underneath can lift away from the core; both are avoidable, and neither is fixed by simply buying a tougher board. Store boards on a rack or flat with the deck up, out of the sun, and never nose-down against a wall where the tail carries the weight.

Carry the board, do not drag it. Sand and grit work into the skin when a board is pulled across a car park, and a board stacked under three others in a trailer will take rail dents that no amount of EVA will hide.

For a fleet, a little routine goes a long way: number the boards, rotate them between instructors, pull anything with a lifted edge out of rotation until it is sealed, and keep the rack out of the sun. Any wholesale soft top surfboard programme runs on that routine — the boards last longer, the fleet looks consistent, and the replacement order comes round less often.

Specifications

ModelB70112
Board typeEVA soft top surfboard, longboard outline
Length8 ft 0
Range positionLongest model in the EVA soft-top range
OutlineRounded nose and rounded tail
CoreEPS foam
LaminateFibreglass cloth and epoxy resin
Outer skinExtruded EVA foam over deck and rails
Fin systemFutures fin boxes
Rider levelBeginner to early intermediate
Typical useLearn-to-surf lessons, rental fleets, mixed-ability classes

Ordering & Delivery

  • Start from a written specification. Every epoxy soft top surfboard we build is made to a confirmed spec — length, deck finish, fin boxes and the accessory mix — agreed before production starts, so what arrives matches what you planned.
  • Confirm the fin set. Fins can travel with the boards or be left out if your fleet already stocks a compatible set. Tell your sales contact which you want; it changes what is packed, not the board.
  • Mix the load. Boards, leashes, pads, covers and racks can be consolidated into one wholesale soft top surfboard order, which keeps the fleet consistent and saves handling at your end. Confirm the mix and how it should be packed.
  • Check before you commit. If your team needs to handle a board before placing a programme, ask your sales contact about sample availability and current production time.
  • Branding and colours. Deck colourways and school or private-label artwork are agreed per programme. Confirm the artwork files, the placement and how the branding sits with the deck colour before production.
  • Plan the freight. An 8 ft 0 board is bulky for its weight, so freight is usually quoted on volume; confirm the pallet or crate plan, the shipping method and the delivery address with your sales contact early.
  • Terms and dates. Payment terms, documents and delivery dates are set per order with your sales contact. As an EVA soft top surfboard supplier we schedule production against the slot you book, so the earlier the dates are fixed, the easier the season is to plan.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

What kind of waves does this 8ft soft top surfboard suit?

It is happiest in the small, soft beach breaks and mellow point waves where most lessons happen. The longboard outline carries through the flat sections and keeps a rider moving when the wave is not steep enough to give a shorter board much to work with. A competent surfer can take it out on a bigger day, but it is not built for steep, fast reef breaks — a shorter board is the better tool there. For a school that is rarely a limitation, because the classes happen where the board works.

Will it carry a heavier adult or a tall beginner?

Yes. The length is what makes this the soft top surfboard for beginners who are fully grown: more board in the water means more paddle support, an easier sit between waves and a stable platform when a heavier rider stands up. A light child can ride it, but most schools put younger, lighter students on a shorter length and keep the 8 ft 0 for adults and mixed groups. If you are matching boards to a particular group, tell us the riders' heights and weights and we will say which length fits.

Can we fit our own fins to this board?

If they are Futures-compatible, yes. The boxes are set into the tail, so a single-tab Futures fin seats the same way ours does, and swapping fins on an epoxy soft top surfboard is a normal part of tuning it to the conditions. Double-tab fins with an FCS base will not seat in these boxes. If you are not sure what your stock uses, send a photo of a fin base and we will confirm before you order.

Does the EVA deck need wax?

No. An EVA soft top surfboard is ridden bare — the foam skin is what provides the grip, and wax works into it rather than sitting on top, which makes it hard to clean out and unpleasant for the next rider. If your instructors prefer a waxed feel, test it on one board before treating a whole fleet.

How does the 8ft0 compare with the shorter soft tops in the range?

The 8 ft 0 is the long one: most paddling support, earliest wave entry, slowest turn. The 7 ft 4 in the same EVA construction suits lighter teenagers and adults who still want to turn the board, and the 6 ft 6 fish soft-top is for students who have outgrown the long learner board and want a looser feel without stepping onto a hard board. Because we build the whole learner range as one soft top surfboard manufacturer, the three share the same laminate, the same EVA skin and the same fin system, so a school can mix lengths in one order and one set of spares.

What should we do if the EVA skin gets cut?

Small cuts and nicks can be trimmed back and filled, and a lifted edge can be sealed before water gets underneath. The important step is to stop using the board until it is dry and sealed — once water tracks under the skin, the damage spreads and the board stops being worth repairing. Send us a photo of the damage; we have seen most of the ways an EVA deck fails and can tell you whether it needs a patch or a replacement.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description