• B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK

B70138 EPOXY SURFBOARD 9FT1 WOOD DECK

No.B70138
Epoxy Surfboard materials, technology, and design have constantly been evolving over time, with many shapers introducing new high-performance construction methods that offer different performance characteristics.
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK
  • B70138 EPOXY SURFBOARD 9FT1 WOOD DECK

Description

Product Overview

The first thing anyone notices is the deck: a light wood-grain field running nose to tail, broken by darker vertical stringer lines, with mint green rails wrapping the edge and carrying through to a solid mint green bottom. From across a showroom it reads like a classic timber longboard; up close it is a clean, modern board with a smooth satin deck and matte rails. Under the finish it is a laminated epoxy board with a light foam core, glass and resin, so the wood deck epoxy surfboard on your wall is the same one that goes in the water on Saturday. At nine foot one it is the longboard end of the range — long enough to paddle easily and catch a wave early, stable enough for a beginner to find their feet, and shaped with a rounded nose and pointed tail so an experienced rider can still trim and turn without fighting it. Shops put it at the front of a longboard section because it sells on looks. Schools and resort rental desks like it because customers ask for it by appearance and it still behaves like a proper longboard once it is in the surf. Approve a colour reference once and the run you receive is the run you sold.

EPS & Epoxy Construction

  • EPS core. The blank is expanded polystyrene — light for its volume, stiff enough to hold a longboard outline, and buoyant enough to keep the board riding high between strokes.
  • Fibreglass cloth, epoxy resin. Cloth is laid over the blank and laminated with epoxy rather than polyester, which gives a higher strength-to-weight ratio than a traditional poly board: less weight to swing around, more resistance to the knocks a board collects in daily use.
  • A hard laminate, not a foam shell. The eps epoxy surfboard build means the outer skin is a solid laminate, so the deck holds up to knees, heels and the way a board is dragged out of a van.
  • Light under the arm. A longboard is awkward to carry whatever it weighs, but the epoxy build keeps 9ft1 manageable for one person and quick to accelerate onto a wave.
  • Laminated in our own shop. As an epoxy surfboard manufacturer we control the blank, the layup, the fin boxes and the finish in-house, which is what makes the custom epoxy surfboard you approve the board you can reorder.
  • What it means on the floor. Boards that come back looking straight rather than boards that come back dented — the difference between a range that sells and a range that generates complaints.
  • If your fleet is harder on boards. Tell us the riding conditions and we will confirm which layup suits your programme before you commit.

Wood Deck & Rail Finish

The deck graphic is the whole point of this model. A light wood-grain field runs the length of the board, divided into panels by darker vertical stringer lines that follow the outline instead of cutting across it. The mint green rails wrap the deck edge, deepen slightly where the edge turns, and continue underneath as one solid mint bottom. From the side you see a thin, clean rail line; from above, the wood; from below, a single calm colour. On a wall of white boards it separates itself instantly, and it is the sort of 9ft epoxy surfboard that photographs well for a catalogue listing without styling, props or a second board beside it. That matters more than it sounds: a longboard that reads clearly in a thumbnail and again on a shop floor is a longboard that gets picked up twice.

Because the pattern is sealed into the laminate rather than left as a raw surface, it does not need oiling or re-finishing the way bare timber would. Underneath the graphic this is an eps epoxy surfboard with a hard deck, so the pattern sits on a solid panel that takes a knee or a dropped rail without the finish lifting. Keep solvents, acetone and abrasive pads away from it; beyond that the surface asks for nothing special. If you are reordering to match an earlier run, check the colourway against the reference you kept — appearance across runs should be agreed before production rather than discovered on arrival.

Ride, Fins & Deck Gear

  • Early paddle. Nine foot one of outline floats high and picks up the smallest push, which is how a longboard catches waves a shorter board simply misses.
  • Glide through flat sections. Once planing, the board keeps running through the soft parts of a wave — the reason longboards suit small days and long, drawn-out point breaks.
  • Stability for learning. A beginner can stand up, take a step and get back in without being tipped off at the first wobble.
  • Turning from the tail. The rounded nose and pointed tail let a stronger rider pivot from the back third and keep the arc smooth rather than sharp.
  • One shape, several riders. A 9ft epoxy surfboard works for a first-timer on a lesson and for a competent rider on a clean day, which is exactly what makes it useful in a mixed fleet or a rental rack.
  • Fins. Fin boxes are fitted; the fin set itself is agreed with your order. Honeycomb fins in single tab and double tab bases are resin transfer moulded, light and versatile — a single fin favours glide and trim, a smaller set gives quicker direction changes.
  • Leash. Match the cord to the length. The Hypalon 9ft 8 mm in our range is the longboard option, described for medium to large waves or a longer board.
  • Traction. A tail pad adds grip where the back foot lands. On this wood deck epoxy surfboard many buyers keep the deck bare to show the grain and fit only a small tail pad.
  • Cover and rack. A stretch cover or regular bag protects the finish in transit, while display racks, storage racks and travel rax keep a shop floor and a back room tidy.

Specifications

SpecificationDetail
ModelB70138
Length9ft1
OutlineLongboard, rounded nose, pointed tail
CoreEPS foam
LaminationFibreglass cloth with epoxy resin
DeckWood-grain finish with vertical stringer lines
Rails and bottomMint green
Deck surfaceSmooth satin finish
Rail surfaceSmooth matte finish
Fin boxesInstalled; fin set confirmed with your order

Care & Storage

  1. Rinse the board with fresh water after every session and dry it with a soft towel before it goes into a bag or onto a rack.
  2. Keep it out of direct sun and out of hot cars. Epoxy boards do not like sustained heat, and a longboard left on a dark roof rack all afternoon is asking for trouble.
  3. Store it flat on a padded rack, or upright with the tail supported. Never stand it nose-down on a hard floor, where the nose carries the whole weight.
  4. Fit a rail saver where the leash attaches. On an epoxy longboard surfboard the rails are the first thing a leash cord wears through, and a saver costs far less than a repair.
  5. Check the rails and tail for dings after every session. A small crack that takes in water becomes a much larger repair if it is left until the end of the season.
  6. Carry a board this length with two hands, and with two people where you can. In wind a 9ft eps epoxy surfboard behaves like a sail, and most damage happens between the water and the van.
  7. Use wax matched to the water temperature, scrape it back rather than scraping the deck, and never use solvent on the graphic.

Custom & OEM Options

OptionWhat you can specify
Order typeStock boards or a custom epoxy surfboard programme
Deck graphicThe wood-grain finish as standard, or your own artwork
Rail and bottom colourMint green as standard; other colours agreed per programme
BrandingLogo on the deck, the rail or both, placed to your artwork
Length9ft1 as standard, with other lengths from the range on the same order
Fin boxesFin configuration confirmed with your order

Ordering & Delivery

  1. Send your size and colour mix, plus any other lengths you want on the same order, so the range arrives together rather than in pieces.
  2. Ask your sales contact about sample availability and current lead time for your quantity and destination.
  3. Tell us which fin set, leash length and deck gear should ship with the boards. For a wholesale epoxy surfboard order we can pack the matching leash and fins with each board so it goes straight onto the floor.
  4. Confirm packing, carton marking and any labelling you need with your sales contact before production is scheduled.
  5. Confirm payment terms, shipping terms and the documents your market requires — these are set per order, not fixed on this product.
  6. As an epoxy surfboard manufacturer we build to the delivery window you give us, so tell us early if your date cannot move.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

Is this board made in your own production or sourced from another factory?

It is laminated in our own production. As an epoxy surfboard manufacturer we control the EPS blank, the fibreglass layup, the epoxy resin and the final finish, which is how the same outline, deck graphic and rail colour can be repeated on a reorder. If you are comparing us against a current supplier, send us their board and we will tell you where the two builds actually differ before you commit.

Will this longboard fit a range that is built around shorter boards?

Yes. A shop that stocks shortboards and mid-lengths usually needs one or two longboards to anchor the wall and to serve older or less experienced customers. As part of a wholesale epoxy surfboard order it can travel with the shorter shapes, so the range reads as one collection rather than a set of unrelated boards, and staff have an obvious step-up to offer.

Can we have this shape under our own brand?

Yes. It is built as a custom epoxy surfboard when you want your own deck artwork, rail and bottom colour, logo placement or a different length within the range. Send artwork files and colour references and we will confirm what can be reproduced on the deck and rails, and what the finished board will look like before the run starts.

What kind of waves does it suit?

It is happiest in small to medium surf with some push — soft beach breaks, mellow reef rollers and the longboard-friendly days most schools and rental desks work in. A 9ft epoxy surfboard this long also handles shoulder-high days comfortably once the rider can control the trim. Steep, hollow, fast-breaking waves are where it stops being fun; that is shortboard territory.

Is the deck real timber?

The deck carries a wood-grain finish with vertical stringer lines, sealed into the laminate rather than left as bare timber, so it does not need oiling and wipes clean. That sealed surface is what makes this wood deck epoxy surfboard practical on a showroom floor and in the water. If your range specifically needs a genuine timber veneer deck, tell us and we will confirm what is possible.

How does it feel for someone moving up from a mid-length?

Longer, smoother and considerably easier to paddle. An epoxy longboard surfboard of this length picks up swell earlier, holds its glide through flat sections and gives the rider time to stand, adjust and turn instead of scrambling for the next section. Most riders notice the extra length when carrying it and forget it within the first ten minutes on the water.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description