• B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES

B70139 EPOXY SURFBOARD 7FT4 FUTURES

No.B70139
Epoxy Surfboard materials, technology, and design have constantly been evolving over time, with many shapers introducing new high-performance construction methods that offer different performance characteristics.
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES
  • B70139 EPOXY SURFBOARD 7FT4 FUTURES

Description

Product Overview

Ask what a mid-length is for and the answer is usually "the days you actually get in the water". The look is deliberately simple. A white deck with black rails and a single central stringer line running nose to tail reads clearly on a shop wall, and the white underside with its epoxy surfboard futures fins boxes marked at the tail keeps the hardware side obvious on the rack. It is the shape a customer buys after two or three lessons, and the hire board that has to cope with mixed abilities on the same day.

EPS Core & Epoxy Laminate

  • EPS foam core. Epoxy surfboard EPS construction starts with a moulded EPS foam blank. It is the core family an epoxy surfboard manufacturer can hold constant across a range, so a 7ft4 ordered alongside a 9ft1 behaves like it came from the same place — because it did.
  • Fibreglass and epoxy resin shell. The blank is wrapped in fibreglass cloth and sealed with epoxy resin, and the laminate bonds into a stiff skin that spreads an impact across the deck instead of letting it concentrate in one spot.
  • Light where it matters. A lightweight epoxy surfboard carries less swing weight: it comes off a roof rack easily, paddles with less effort and reacts faster under the front foot than a traditional polyester board of the same length.
  • Dents and rail cracks take longer to appear. Epoxy over EPS holds its shape under repeated knocks — on a wholesale epoxy surfboards order, that is the difference between a fleet board that finishes the season and one that comes back soft under the front foot after a month of lessons.
  • A rocker line that keeps the board alive. The curved profile from nose to tail lifts the nose on a late drop and releases cleanly out of a turn, so one board covers soft beach break and steeper reef days.
  • Thin, sanded rails. The rail is taken down to a fine edge rather than left boxy — that is what lets a 7ft4 epoxy surfboard turn without the width fighting the rider.
  • A finish that takes handling. Smooth sanded rails and a sealed deck wipe down, stack on a rack and go back out for the next session without special treatment.

Futures Fin Setup

  • One fin language across the wall. An epoxy surfboard futures fins specification means the boxes on this board match the Futures fins already in your shop or school kit, so staff do not have to remember two fitting methods or keep two sets of screws.
  • Fins are ordered alongside, not fitted at the factory. The board arrives with the boxes installed, and as a custom epoxy surfboard supplier we leave the fin choice to you: the set that suits the waves you sell into and the price point of your range.
  • Match the tab to the box. Our honeycomb fins are supplied in single-tab and double-tab builds. Tell us which box type your order carries and we will match the fin set to it, or you can pull fins from stock you already hold.
  • Honeycomb as the all-rounder. Resin transfer moulded honeycomb fins are light and work across a spread of conditions, which is why they are the usual pairing on a lightweight epoxy surfboard like this one.
  • Other builds in the range. Timber and G10 glass fins are available where a shop wants a different feel under foot or a premium upsell displayed next to the board.
  • Spares planning. Keep a small box of spare fins and a fitting key at the rental desk, so a board with one missing fin is back in the water the same morning rather than waiting on a delivery.
  • Inspect the boxes when a board comes back. Look at the box edges and the screws after a heavy session; a loose box is a quick fix if it is caught early and an expensive one if it is left.

Board-Matched Accessories

For a 7ft4 epoxy surfboard the natural pairing from our range is a 7ft leash: 6ft lengths stay with the shorter boards in a fleet, and 8ft goes with the longboards. Cord thickness steps from 5 mm on the small-wave leashes up to 7 mm on the all-round and longboard lengths, and in shared use the cuff choice matters more than the cord — the regular double-padded neoprene cuff suits individual riders, the non-slip cuff stays put across different ankle sizes in a rental pool, and the Hypalon cuff is the lightest of the three for riders who notice weight on the ankle. Traction is the next choice. A tail pad gives the back foot a raised ridge to push against on a board ridden with more glide than a shortboard, centre pads cover the area beginners drag their knees across, and waxless pads take wax out of the daily routine altogether — cleaner decks and less sand in the store room. Covers and racks finish the order: a basic bag or a stretch cover for transport and off-season storage, a storage rack for a school container or a display rack for the shop floor, and a travel rack with tie-downs for a van that moves a fleet between beaches.

Who It Suits

Surf schools and rental desks are the most common buyers at this length. A single epoxy surfboard in 7ft4 covers a wide band of student sizes, so an instructor can move the same board from a first-timer to a returning improver without rewriting the lesson plan. Independent shops and multi-door chains use it as the dependable line in a range and the board that anchors their wholesale epoxy surfboards order. Progressing riders buy it for themselves when they want more response than a soft-top but are not ready to give up the paddling ease of a longer board. It is also the model a shop puts in front of the customer who has rented three times and is ready to own.

Specifications

SpecificationDetail
ModelB70139
Length7ft4
OutlineAll-round, pointed nose and tail
NosePointed
TailPointed
CoreEpoxy surfboard EPS construction: moulded EPS foam core
LaminateFibreglass cloth with epoxy resin
Fin systemFutures fin boxes
RailsThin, sanded edge
FinishSanded rails, sealed deck
Rider levelAdult learners through improving surfers
Typical useAll-round surfing, school and rental fleets
Ordered alongsideLeash, fins, traction pads, cover, rack

Care & Board Handling

  • Keep it out of long, direct heat. A board left on a hot deck or in a closed car for hours is where epoxy boards go soft; shade and a cover do most of the work. - Fix chips early. A rail chip that lets water into the core becomes a much bigger repair if it is left; dry it, seal it and put the board back into rotation. - Store it on its edge or flat on a rack. Leaning a board on its tail for weeks puts a point load on the tail and the fin boxes. - Check the leash string and rail saver. The string wears before the leash does, and a rail saver that has slipped is what saws into a rail. - Take fins out for transport. Long road trips with fins fitted load the boxes sideways; removing them is the cheapest protection there is. - Remove wax with warm water, not solvent. A gentle scraper and warm water lift old wax without dulling the finish.

Ordering & Confirmation

  1. Send the board quantity together with the accessory lines you want on the same order — leash, fins, traction, cover, rack — so everything is sized against the board at once.
  2. Confirm the fin position: whether fins should ship with the boards or you will fit them from your own stock, and which tab type your boxes carry.
  3. Confirm the finish. Stock boards ship in the standard factory colourway; where you want your own deck graphic, rail colour or logo placement, we will review the artwork with you as a custom epoxy surfboard supplier before production.
  4. Ask your sales contact about sample availability and the current production schedule before you commit to a season's volume.
  5. Confirm packing and shipping terms for your destination — carton specification, board protection inside the carton, and how the boards will be palletised.
  6. Confirm branding if the boards carry your logo: artwork files, placement on the deck and the approval step before the run starts.
  7. Plan the reorder against your season rather than against a stock-out, since fleet boards wear out in the same weeks each year.
  8. For wholesale epoxy surfboards orders spanning several sizes or colours, send the full matrix as one list so quantities and accessory pairings are checked together.

Scale & Supply Capability

CIMI is a factory-based supplier with 16 years in surf and watersports hardgoods, manufacturing at our own facility rather than sourcing through traders. Chain stores, supermarkets and surf-brand stores buy from us because one supplier covers a full accessory assortment, so a season's order and its reorders can be planned together. We take on OEM and private-label work, adapting designs, colourways and branding to your programme, and we schedule production against your agreed range plan. Send us your buy list and target dates, and we will confirm what we can make and when.

FAQ

Which fins fit this board?

The board is supplied with Futures fin boxes set at the tail, so a Futures-base fin set goes straight in. Our honeycomb fins come in single-tab and double-tab builds — tell us which boxes your order carries and we will match the fin set, or fit fins from stock you already hold. An epoxy surfboard futures fins pairing like this keeps one fin system across a mixed fleet.

How does an epoxy surfboard hold up in daily rental use?

Better than the poly boards most fleets start with. Epoxy surfboard EPS construction pairs a foam core with fibreglass and epoxy resin, so the deck resists the pressure dents that show up first on hire boards, and the rail keeps its shape after repeated knocks. Rinse the board at the end of the day and seal rail chips early, and the same board will keep working through a season of lessons.

Does the board come with a leash, fins and traction pad?

They are separate lines rather than bundled with the board. Because we are an epoxy surfboard manufacturer, the leash, fins, traction, cover and rack are built and packed to suit this board's length and outline, and most buyers order them at the same time so everything arrives sized and matched. Tell us which of them you want on the order.

Is a lightweight epoxy surfboard at a disadvantage in chop or bigger surf?

Weight is not the same thing as stability. The 7ft4 outline carries enough volume to sit steady in bumpy water, while the lighter build lets it accelerate onto a wave instead of being pushed around by it. Heavier surf and strong offshore winds still favour a longer board, so keep a longboard in the quiver for those days.

Can we order our own colours or branding?

Yes. Stock boards ship in the standard factory colourway; for a private-label run we can look at your own deck graphic, rail colour and logo placement. As a custom epoxy surfboard supplier we confirm artwork and position on this outline with you before production starts.

What conditions is the all-round outline drawn for?

Small, soft beach break through to steeper reef days — the outline is shaped to cover average conditions rather than one extreme. A 7ft4 epoxy surfboard of this length paddles early enough for a slow wave and still turns when the face stands up, which is why it works as a one-board answer for mixed-ability groups.

Leash

Fins

Traction

Cover

Rack

Regular longboard ankle leash for medium to large waves or a longer board
The CIMI Surf Leash Hypalon 8ft 7mm is the ideal choice for surfers seeking a durable and reliable leash. Made with high-quality Hypalon, this leash offers exceptional strength and comfort, ensuring a safe and enjoyable surfing experience.
Regular leash for medium-sized waves and all-around conditions
Lightweight leash for small to medium-sized waves
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
The CIMI Double Tab Surf Fins are crafted to boost your surfing performance. With high-quality construction and superior design, these fins offer enhanced stability, control, and durability.
Honeycomb fins are made using a resin transfer molding process. This versatile fin material is light, and can be used in a variety of different conditions
Enhance your surfing experience with CIMI's high-performance Surf Traction Tail Pads. Designed for durability and superior grip, these tail pads provide exceptional control on your surfboard.
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description
Your product's brief description